Lights, camera, auction. Your viewers came for a show. They came for the energy, the banter, the moment when something goes for far more than you expected.

They did not come to watch you write a name on masking tape.

Dead air is expensive

Every time you look down to write, peel, stick or check a list, the energy dips. It is a small dip, a few seconds. But live shows are built on momentum, and a few seconds, repeated through the night, add up.

People can tell when a host is busy with something else. They drift. The best hosts look like they have nothing to do but talk to you.

Keep the mess behind the curtain

Pay no attention to the man behind the curtain. The audience should see the performance, never the machinery: the tape gun, the pile of boxes, the half-finished notepad. All of it is real work, and none of it belongs on screen.

The goal is to push as much of that work as possible out of the moments when you are talking. Do it before the show (prep), or let a tool do it (automation), or batch it into the breaks you plan on purpose.

Your pre-show checklist

Most mid-show problems are really pre-show problems. Run this list before you go live, every time:

  1. Printer paper loaded. A fresh roll, plus a spare within reach.
  2. Test tag printed. Peel it, read it, confirm it sticks.
  3. Boxes numbered. Written large, lined up in order, with a few big ones ready.
  4. Tape, marker and scissors. The marker works. You checked.
  5. Water within reach. Not on top of the keyboard.
  6. Chargers plugged in. Laptop, phone, printer. Cables taped down.
  7. Backup hotspot tested. Switch to it once, then switch back.
  8. Sold list open. One tab for the platform's orders or sold page.
  9. Camera and sound checked. Look at yourself for ten seconds.
  10. Break plan. Decide when your breaks are, and tell your viewers.

Ten items, five minutes. It is the cheapest insurance in live selling.

Plan your pauses

You will still need breaks, and that's fine. A planned pause ("two minutes, grab a drink, back with the next lot") feels like part of the show. An unplanned fumble doesn't.

  • Use breaks for the work that can't be automated: sealing boxes, restocking tape, a quick look at the sold list.
  • Don't fix problems silently while the camera is on you. Say so, keep it light, move on.
  • Tell viewers what's happening. Honest and calm beats awkward and silent.

Where a tool helps

Ship Show is built around this idea. When a buyer wins, a tag prints by itself with the box number on it. You peel, stick and keep talking. The writing, the notepad and the lookup happen somewhere else.

It runs on a Mac today, and Whatnot is the platform that is connected so far. A tool is not the point, though. The point is that the person on camera should be on camera.

Talk to the camera, not the tape

A simple test: during the next show, notice how often your eyes leave the lens. Every glance down is a small break in the conversation. You don't need to eliminate them all. You need the common ones, the writing and the looking-up, to stop being your job while you're mid-sentence.

Do one thing this week. Pick the single most annoying task you do on camera and move it before the show, into a break, or onto a machine. Then see how the room feels.

Press go

When the checklist is done, take a breath, hit go, and be the host people came to see. Everything behind the curtain has a place. You have nothing to do right now but sell.


Ship Show is in early access. It prints a tag the second a buyer wins and tells you which box it goes in. Get on the list and we will tell you when your platform is ready.