The printer will betray you. Not maybe. It will pick the exact moment a bidding war ends, the chat is loud, and four items sell in a row. Then it will blink, and that's it.

You can't stop a printer from failing. You can make sure that when it does, you lose two minutes instead of the night.

How thermal printers let you down

Thermal printers print with heat on special paper, so there is no ink to run out. That makes them neat. It also means the usual failures are physical:

  • The roll runs out. Always mid-show, never at a convenient time.
  • The paper jams or feeds crooked, especially with a loose roll.
  • The cable gets kicked. A boot, a chair leg, a cat. Out it comes.
  • The cover isn't quite shut. Some printers just stop.
  • The computer lets go of it. A sleeping laptop or a wobbly USB port can drop it.

None of these are exotic. All of them are cheaper to prevent than to fix live.

The pre-show printer routine

Five minutes before you go live:

  1. Fit a fresh roll. Don't start a big show on a half-used one.
  2. Keep a spare roll in reach. Out of camera, in arm's reach, already unwrapped.
  3. Print one test tag. Check that it is readable and sits properly on the label.
  4. Move the cable out of foot range. Tape it down or route it along the back of the desk.
  5. Check the lid is closed and the paper is feeding straight.
  6. Stop the computer sleeping. Turn off any sleep setting for the length of the show.

Clean the printer now and then too. Dust makes crooked feeds. Check your printer maker's current care guide for the right way to do it.

What to do when it fails live

Don't stop selling. Keep going, and keep a record of what you owe the printer.

  1. Write down, on paper, the items that sold while it was down: box number and item.
  2. Fix the cause quickly: a new roll, a pushed-in cable, a clear jam.
  3. Reprint the missing tags in the order the items sold.

The order matters. If you print in a rush and shuffle the order, tags end up on the wrong items. Slow and in order beats fast and mixed up.

What Ship Show does when the printer drops

Ship Show watches the printer. When it is unplugged, you see a plain notice, and new tags don't vanish. They wait in a line. When the printer is back, the waiting line prints in the order the items sold, so you don't have to remember who was next.

There are some other buttons for bad moments:

  • Pause printing holds tags on purpose, for when you want to change a roll without a tag firing halfway through.
  • Reprint a tag if one comes out smudged or torn, or a whole box if you lose the lot.
  • Quick tag or tag by hand lets you make a tag yourself when something sells off-screen or the platform hiccups.

The honest part: all of this has been proven on a practice show with pretend buyers. A real label printer has not yet been tried on paper, so keep your spare roll and your pen close. It runs on a Mac today.

The short version

Spare roll, test tag, cable out of the way, sleep setting off. Do those four things and the printer's betrayal becomes a small hiccup. And when it still gets you anyway, a waiting line means nothing falls through the cracks. Hold onto your ship, and your tape.


Ship Show is in early access. It prints a tag the second a buyer wins and tells you which box it goes in. Get on the list and we will tell you when your platform is ready.