A win tag has one job: tell you whose item this is and which box it goes in, at a glance, at speed, at eleven at night. The label size you pick decides how well it does that job and how much paper you burn doing it.

Four sizes come up again and again. Here is what each is good for, and how to choose without buying a case of the wrong rolls.

First, what has to fit

Before sizes, decide what your tag needs to say. In rough order of importance:

  1. The box number. As big as you can make it. This is the thing you read from a distance.
  2. The buyer's name. The double-check on the number.
  3. The item. A short name, so you can tell this tag from the last one.
  4. Extras. Price, date, a scan code, your logo. Nice to have, and each one takes room.

The more you want on the tag, the bigger the label you need.

2 x 1 inch: the small one

Two inches wide, one inch tall. The rolls last a long time, and it fits on nearly any item.

  • Good for: a box number, a buyer name and a short item name.
  • Tight for: long item titles, a price, a scan code and a logo all at once.
  • Pick it if: you sell small items, run long shows, and want the tag to say the basics and nothing else.

2.25 x 1.25 inch: the roomy small one

A quarter inch more each way does not sound like much. It is room for a bigger box number and one more line.

  • Good for: box number, buyer, item, and one or two extras.
  • Pick it if: you want a small label but keep wishing the number were bigger.

3 x 2 inch: the readable one

Real space. The box number can be huge, and a scan code and logo fit without squeezing.

  • Good for: everything, with a number you can read from the far end of the table.
  • Costs you: more paper per tag, so more roll changes on a long show.
  • Pick it if: your items are big enough to carry it, your eyes are tired, or a helper packs from a distance.

4 x 6 inch: the shipping label size

This is the usual shipping label size, so many sellers already have a printer loaded with it. You can print a win tag on it. It is a lot of paper for a box number.

  • Good for: using the printer and rolls you already have, with no second roll to buy.
  • Costs you: a big label on every item, and rolls that run out faster.
  • Pick it if: you have one printer, do not want to change rolls between tags and shipping labels, and do not mind the size.

One warning. A win tag is not a shipping label, even when it is printed on the same paper. Print your shipping labels through Whatnot and follow its current label rules. The win tag only lives on your packing table.

What to check before you buy rolls

  • What your printer takes. Every label printer has a widest and a narrowest label it can feed. Check the manual for your exact printer before ordering.
  • Direct thermal labels. These need no ink or ribbon; the printer darkens the paper with heat. That also means they can fade with heat, sunlight and time. Fine for a tag that lives a few days. Not for anything you need to read next year.
  • The sticky side. A removable adhesive peels off an item cleanly. A permanent one may leave a mark or take the packaging with it. If the tag goes straight onto the product, this matters a lot.
  • The printer's own paper setting. The label size set on the computer has to match the roll that is loaded. A mismatch is the usual cause of a tag printed half on one label and half on the next.

Test before show night

Whatever you choose, print ten test tags and stick them on real items. Stand where you stand during a show and read the box number. If you squint, you're gonna need a bigger label.

How Ship Show handles label sizes

Ship Show's tag designer has these four sizes built in: 2.25 x 1.25, 2 x 1, 3 x 2 and 4 x 6 inch. You pick one, then switch tag lines on or off: item, price, date, scan code, logo, box number, and a bigger box number. More on the features page.

Now the honest part. The tag designer is built, and the tags have been measured on screen at all four sizes with every line switched on. None of it has been printed on real paper yet. On the 4 x 6 size, the tag fills the top third of the label and leaves the rest blank. It is made for standard thermal label printers. We name no models, because none has been tested; tested models get listed at launch.

Ship Show works with Whatnot on a Mac, and its first real live show is still to come. If you want to hear how the paper test goes, get on the early-access list.


Ship Show is in early access. It prints a tag the second a buyer wins and tells you which box it goes in. Get on the list and we will tell you when your platform is ready.